Prince George's County

Concrete and Construction services in National Harbor, MD

From waterfront townhomes to busy commercial properties, G & D Construction builds National Harbor concrete, masonry and remodeling work to a high standard.

Open 24/7 in National Harbor · Licensed & insured · 16659120

G & D Construction service van outside a home in National Harbor, MD

About our National Harbor service

G & D Construction serves National Harbor from our base in Lanham. We handle driveways, sidewalks, patios, steps and ramps, retaining walls, decorative concrete, pavers, masonry, fencing, railings and interior and exterior remodeling for homeowners, property managers and businesses.

National Harbor is a planned waterfront community on the Potomac River, with townhomes, condominiums, hotels and shops close together. Projects here often involve association approval, tight access and busy public areas, so we plan each one carefully before work begins.

Local conditions

Planning your project in National Harbor

Association approval comes first

Most National Harbor homes belong to a homeowner or condominium association with rules for exterior changes. We provide the drawings, materials and details your association needs, so approval goes smoothly.

Waterfront rules may apply

Properties near the Potomac can face Chesapeake Bay Critical Area limits on new hard surfaces. We check the requirements before planning patios or walkways, so the project fits within the rules.

Working around busy areas

Commercial properties, sidewalks and shared spaces stay in use while we work. We schedule the job, protect walkways and stage materials carefully to keep disruption to residents and visitors low.

Townhome and condo remodels

Inside, we remodel kitchens, bathrooms and basements and handle drywall, flooring and painting. Outside, we update windows, doors and millwork, all coordinated under one contractor from start to finish.

Services in National Harbor

Everything we do here.

At the structural pour stage, a worker guides a concrete vibrator into freshly placed concrete around reinforcing steel, watching the material settle rather than looking toward the camera

Concrete

Concrete work for driveways, slabs, structural projects, and finished outdoor spaces.

After a driveway slab has set enough for joint cutting, a worker guides a walk-behind concrete saw along a marked control joint, focused on the cut rather than the camera

Flatwork and Driveways

Concrete flatwork and driveways for residential, commercial, and governmental projects.

Before the concrete is placed, a worker uses a rebar tying tool to secure reinforcing steel inside a footing form, checking the spacing as they move along the grid

Structural Concrete

Reinforced concrete work for foundations, walls, footings, and other load-bearing parts of a project.

A worker presses a concrete stamping mat into freshly placed concrete during the decorative finishing stage, using a hand tamper to transfer the pattern evenly across the surface

Decorative concrete

Concrete surfaces finished with a decorative pattern, texture, or other selected appearance.

At the installation stage of a paver walkway, a worker taps an individual paver into place with a rubber mallet and checks its alignment with a spirit level

Masonry and Hardscaping

Brick, block, pavers, retaining walls, and exterior features built around your property.

During the mortar-laying stage of a brick wall, a worker uses a brick trowel to butter the end of a brick before setting it into the course

Brick and Block Work

Brick and block work for walls, repairs, edging, and other masonry projects.

At the final compaction stage of a paver patio, a worker guides a plate compactor across the newly laid surface to settle the pavers and joint material

Hardscapes and Pavers

Build a practical paver surface for walkways, patios, and other outdoor areas.

At the base-preparation stage, a worker uses a hand shovel to shape the trench for a retaining wall while checking the layout against a taut string line

Retaining Walls

Retaining walls that help organize sloped areas and define outdoor spaces.

A worker checks the alignment of a fence post during the footing installation stage, using a post level while the post is held in position

Fencing

Concrete support for fences, gates, and railings around homes and other properties.

During the interior layout stage of a remodeling project, a worker uses a tape measure and pencil to mark the position of a new wall opening beside existing framing

General Construction

Construction and remodeling support for additions, interiors, exteriors, and site work.

During the interior finishing stage, a worker uses a paint roller to apply a finish coat to a newly prepared interior wall, working carefully along the edge near the trim

Additions and Interiors

Additions and interior work planned around the existing structure and the way you use your home.

At the wall-preparation stage, a worker spreads joint compound over a drywall seam with a wide taping knife, smoothing the surface before interior finish work continues

Interior Finishing

Interior finishing for prepared walls, ceilings, trim, and other completed interior surfaces.

During the exterior installation stage, a worker uses a cordless drill to fasten remodeling material along an outside wall while checking the fit at the joint

Exterior Remodeling

Exterior remodeling for residential, commercial, and governmental properties in Lanham, Maryland.

During site grading, a worker operates a compact track loader to spread fill across a cleared building area, watching the bucket and grade rather than the camera

Site Preparations

Prepare the site, coordinate the groundwork, and support the concrete work from the first layout through the final phase.

During preconstruction planning, a worker studies a concrete site plan with a measuring scale and pencil, marking dimensions and notes beside the drawing set

Permits and Engineering

Permit and engineering support for concrete work that needs clear plans before construction begins.

At the anchoring stage of a railing installation, a worker uses a rotary hammer to prepare a hole in a cured concrete base while checking the planned attachment point

Custom Gates and Railings

Custom gate and railing work with the concrete bases and placement needed for the site.

Reviews

Homeowners who count on us.

4.3 average, based on 22 Google reviews

★★★★

The work was done in a timely manner. My only concern was the placement of some of the equipment on my lawn killed some of the grass.

Joseph Braboy Lanham · Google review
★★★★★

We are very satisfied with the concrete repair work that was completed by G & D Construction. They have good work ethics, pay attention to details, maintained good communication throughout the process. The workers were…

Tasha Johnson Lanham · Google review
★★★★★

G&D Construction has always gone above and beyond since I have done business with them for over 20 years. They installed my driveway at my previous home in 1999. I purchased my current home in 2006 which had an asphalt…

Cyrus Rolling Lanham · Google review

Planning a project? Let’s build it right.

Tell us what you are planning, where the work will take place, and which part of the project needs attention. G & D Construction can discuss the concrete and related construction services involved.

From driveways to additions, let's get your project started.

4.3 22 Google reviews
  • Licensed & Insured
  • Satisfaction Guaranteed
Call us now Book online